🇳🇱
As a scientist I have an innate desire to want to use metric measurements. But as an someone born in America I also have a desire to use obscure measurements no other sane person in the civilized world would ever consider using.
As such I have decided that from now on I will use femtoparsecs and attoparsecs for all measurements of length.
I am 57.6 attoparsecs tall
My jeep gets 344 femtoparsecs to the liter
@freemo
I think metric is the clear winner in scientific areas where you have to switch between scales at least a half dozen orders of magnitude apart.
But in engineering, Metric has no clear replacement for:
* Pounds per square inch
* Foot-pounds (torque)
* Foot-pounds (work)
These are intuitive to anyone who knows inch, foot, and pound.
Pascals and Joules are obviously not intuitive, and neither are Newton-meters because meter-long wrenches are exceedingly rare.
@cjd
An ATM is far more intuitive than a PSI even if you work with foots pounds and inches, its literally a multiple of ambient atmosphere pressure.
But the problem with your whole premise is your saying "as long as i already work with obscure and confusing measurements, and as long as i never have to work with them at large or amall scales, their great".. everything about that statement suggests their broken, especially considering that you cant in any practical sense avoid working with them at scale anyway.
@freemo
Well, if you're SCUBA diving then ATM is very useful and logical. But if you're dealing with compressed air or hydraulic, say you have a piston of 1.5 square inch area and you're running 5000psi hydraulic on that piston, you can do it in your head that you're going to have 7500 pounds of force on that piston. Now try that with ATM and Newtons...
@cjd "say you have this piston of this really obscure and confusing measurement called an inch and it is 1.5 square inch".... thats not an argument for it in my mind as it relies on the idea that PSI is more useful only if you already know an obscure measurement no one uses outside of the USA and is inherently less useful as it doesnt allow for metric prefixes...
On the other hand lets say you had a piston of an actually more useful base measurement, say 1.5 cm squared... all of a sudden metric is just as easy and with multiple additional advantages not the least of which being that the base unit is more intuitive
@freemo
Piston of 1.5 cm2 with 200 ATM pressure, how many Newtons of force, no calculator :P
@wolf480pl @freemo
So basically I'm not saying that the metric system is bad, what I'm saying is that trying to force people to standardize on one system is.
* Datacenter people measure in U (4.4cm)
* Oil traders use Barrels (159L)
* Navel and Aeronautic people use Nautical Miles (1.852km)
* Astronomers use Light-year (9460730472580.8km)
Only a bureaucratic busybody could think that everyone should switch to the same unit.
@cjd @freemo ok, but when the systems these people build interface with each other, it's helpful that they can use a common system that both sides understand.
For example, instead of calculating an orbit in light-seconds, then converting that to miles to calculate how much fuel you need in gallons, and then someone calculating the mass of said fuel, etc. it's easier to use metric throughout.
@wolf480pl @freemo
Yup, it's a balancing act, on the one hand you want units which are easy to work with in common computations used in that sector of industry, on the other hand you want interoperability.
In practice though, you want to just go along with whatever is being used in the space you're working in, units are political.
@wolf480pl @freemo
The problem with kPa is a result of the Newton. If instead of Newtons there was just kg-force then anyone who understood what a kg and a cm is (everyone in Europe) would then be able to reason out the measurements of pressure and torque.
@cjd You seem confused...
you said
> If instead of Newtons there was just kg-force
A newton is a unit force, so adding kg into it as kg-force makes no sense. A newton (as any force would be) is mass-acceleration which in this case is the standard kg * m/s^2
So its already in standard units and all nice simple multiples (unlike PSI which becomes quite confusing in any other multiple like feet)
@freemo
Have you ever operated a lathe, milling machine, surface grinder, welder, air compressor, impact wrench, or torque wrench ?
@cjd yes many times both in metric and imperial units. All the ones in the netherlands and europe are exclusively metric of course.
In fact aside from a small global population in the USA virtually the entire world of people who work with such things all do so in metric...
your point?
@cjd You probably dont realize it but doing science tends to require building things, and often those things can be fairly advanced with very critical specifications. A few millimeters off and you wind up with something that doesnt work at all or bad data.
Have you ever built a particle accelerator by hand for example?
@freemo
Before I got into computers I studied Machine Technology, I've used every one of those things I mentioned at least a little. I also replaced a transmission, built a firewood saw, did a fair amount of residential wiring, and my point is that the Metric system is *not bad*, but there are applications where it doesn't make sense.
I've definitely never built a particle accelerator, but if I did you can bet I'd be working with the measurements used in that field.
@cjd Your expiernce is not in question. I was merely pointing out that scienctists that tend to take on personal projects need to work with every single one of those pieces of equipment as well. Building devices is hard to escape in most areas of science and they tend to have demanding specifications.
Thing is, you havent actually given a single reason that the imperial system is better, the few you gave were simply incorrect (like implying that newtons wasnt based on base metric units).. .yet there are quite a few reasons metric is superior (intuitive units that scale by simple powers of 10).
If you could list even one example of how imperial units are easier to work with in any context at all (that doesnt rely on simple familiarity with imperial units itself) then I'd be happy to consider it. But so far there isnt a single advantage mentioned to imperial units of any kind, not a single setting where imperial units are the norm (outside of the USA), and quite a few reasons metric units are suprior.
There is a reason the entire world, except the USA, uses metric units whether its science, woodworking, carpentry, metalwork, lathe, or any other field you can imagine.. because its the better choice in every field except in the USA which for whatever reason prefers to stay in the dark ages when it comes to unit of measurements.
@freemo
Havent actually given a single reason that the imperial system is better <-- All I ever wanted to say is that forcing a system of measurement on people is bad.
If you could list even one example of how imperial units are easier to work with in any context at all <-- I already told you: PSI, foot-pounds (torque) and foot-pounds (work). They are intuitive to anybody who knows two of the most basic units of that system of measures.
> I already told you: PSI, foot-pounds (torque) and foot-pounds (work). They are intuitive to anybody who knows two of the most basic units of that system of measures.
Yes but that was trivially debunked... Anyone working with the metric system has equivelant units.. Pascal (pressure), Newton-meters (torque) and Newton-meters (work), which require only knowledge of the two most basic units of the metric system, meters and newtons...
So you havent in any way given why imperial is superior at all.. you just said "if i already know how to work with these really obscure units that no one in the world but me and people near me use then its easier cause im familiar with it"... thats a horrible excuse considering we live in a wider world..
Moreover there ARE disadvantages beyond just familiarity.. the lack of easy to remember prefixes being the most notable which makes the imperial system far far less intuitive when working PSI or foot-pounds at large or small scale, while its trivial to work at large or small scales in the metric equivalent.
so while you did try to make that argument it ultimately failed quite poorly IMO.
Moreover forcing a system of measurement on a people is only bad if its arbitrary, when the new system of measurement is significantly superior, as metric is, then it isnt a bad thing at all. Americans would be better off in the end by far considering they are adopting a system with many advantages and leaving behind a system without a single advantage aside from familiarity (which is temporary).
@freemo
Newtons are not the most basic units of the metric system, a common person only knows kg, cm, meters, km, and L.
On the topic of forcing measurement systems on people, have you read Seeing Like A State by James C. Scott? He speaks a bit about the actual history of the Metric system.
@cjd Everything you said applies just as much to imperial as metric... Newton is no more a basic unit than the pound-force is.. However a newton is a combination of the same units in metric as pound-force is in imperial, except that of course imperial units use convoluted numbers and multiplies where metric does not.
In metric is really simple, a newton is the force it takes to make 1 kg of mass accelerate at 1 m/s^2, nice and easy... not so much with the imperial pound-force. 1 pound-force is equal to the force it takes to accelerate 1 pound by 32.174 ft/s2 (good luck remembering that).. or if you really want to get convoluted 1 ounces (16 ounce-force) by 514.784 ft/sec^2
I think its quite obvious that newtons are far more intuitive and easier to remember than the convoluted pound-force.
@freemo
Everybody in the US knows 1lb mass (from buying food) and 1lb-force is almost the same. A newton would work great if it was almost the same as 1kg, but it's not.
But I think the overarching point here is that forcing people to change their units of measure is, and has always been, an act of colonialism. Historically it has usually been combined with forcing people to change their language and religion.
Ooops, yes your right.. my brain mixed it with the first few digits of pi apparently :)
