Anyone know anything about CNC machines (bonus points for 3d printer knowledge too)...
I want to buy a metal-capable CNC as well as a 3D printer to supplement it. Mostly to do random projects. But could use advice on what to purchase.
I am also curious about the software side, ideally id like to get a CNC that is easy to work with from a software level and bonus points if i could somehow use the same software to design for both CNC and 3d printer since parts for any particular project are likely to come from both.
Thanks, yea thats kinda what i figured on the 3d side.. though im not clear how you go from a CAD design to the slicer. Presumable a cad design consists of multiple parts in one design fitted together. The 3d printer, as well as the CNC (depending on which part) will handle the parts indivudally.
So I presume there is some way in the CAD program to break up your design into files where each file represents a different part in a single design. Then you send the 3d ones off tp the slicer, then the CNC ones off to whatever handles that.
Also, like you, I am less clear on the CNC side than the 3d side (though im not all **that** clear on the 3d side either except at a high level, where you seem to have worked with it more).
@freemo Your CAD software will treat each manifold object as a "body" (terminology varies) and you export each body to a mesh in STL/OBJ format for your slicer to process. Slicer gives you gcode for the printer.
@PCOWandre ahh ok that makes sense. So the cad software at least has some sense of discrete parts and can break it down when it comes time to manufacture it...
Now the only question is, what printer and CNC do I buy that is both metal capable and feature rich from a software compatability standpoint (I'd imagine some CNC or 3d printers night not work on open standards or something that i need to look otu for).
@icedquinn not sure i heard of Prusa yet, ill check that out.
@icedquinn Ahh just checked, Prusa is the slicer, not the design software... ok still useful but I assume all slicers work ont he same file formats so I think picking the design software might be the more critical decision here, correct me if im wrong.
@icedquinn To clarify I know that on the 3d printer I'm looking for a bare minimum of 0.1mm resolution or better. I know that rules out most printers that are less expensive,especially when you couple it with my need for a relativly large printing volume.