Lup Yuen Lee 李立源 @lupyuen@qoto.org

Preparing to join #PineDio Stack BL604 to #TheThingsNetwork

https://lupyuen.github.io/articles/ttn?8#join-device-to-the-things-network

#TheThingsNetwork Firmware for #PineDio Stack BL604 ... Yep the same LoRaWAN Firmware ported from Mynewt OS to BL602!

https://lupyuen.github.io/articles/ttn?7#run-the-lorawan-firmware

#TheThingsNetwork LoRaWAN Version for #PineDio Stack must be "1.0.2 Rev B" ... Or we'll get Message Integrity Code errors!

https://lupyuen.github.io/articles/ttn?6#add-device-to-the-things-network

Creating a Device in #TheThingsNetwork for #PineDio Stack BL604

https://lupyuen.github.io/articles/ttn?6#add-device-to-the-things-network

Checking if our #LoRaWAN Gateway is connected to #TheThingsNetwork

https://lupyuen.github.io/articles/ttn?5#gateway-is-up

Remember to set the Server Address ... When adding @RAKwireless LoRaWAN Gateway to #TheThingsNetwork

https://lupyuen.github.io/articles/ttn?4#configure-gateway

How we add a RAKWireless #LoRaWAN Gateway to #TheThingsNetwork

https://lupyuen.github.io/articles/ttn?3#add-gateway-to-the-things-network

No coverage for #TheThingsNetwork? No worries ... You're welcome to add your own #LoRaWAN Gateway to the network!

https://lupyuen.github.io/articles/ttn?2

Connecting #PineDio Stack BL604 @PINE64 to #TheThingsNetwork ... All shall be explained in this article

https://lupyuen.github.io/articles/ttn?1

#PineDio Stack BL604 @PINE64 ... Talks to RAKwireless LoRaWAN Gateway ... And The Things Network!

Why is Xiaomi TV flooding my network with UPnP Broadcasts? 🤔

SPI Regression Testing on #BL604 coming soon! 😬 #BL602 / BL604 Devs: Please see this fix

https://github.com/lupyuen/bl_iot_sdk/pull/34

I hope you have good #TheThingsNetwork Wireless Coverage in your area ...Coverage in Singapore is so spotty 😭

https://www.thethingsnetwork.org/map

We have just transmitted data from #PineDio Stack BL604 to #TheThingsNetwork Cloud over LoRa ... For Free! (Assuming we have The Things Network coverage)

https://www.thethingsnetwork.org/

#TheThingsNetwork receives the data transmitted by #PineDio Stack BL604 thru our LoRaWAN Firmware yay! 🎉

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

Now we send data from #PineDio Stack BL604 to #TheThingsNetwork ... Here are the commands for our LoRaWAN Firmware

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

#PineDio Stack BL604 successfully joins #TheThingsNetwork thru our LoRaWAN Firmware yay! 🎉

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

To join #PineDio Stack BL604 to #TheThingsNetwork, boot the LoRaWAN Firmware and enter these commands

https://github.com/lupyuen/bl_iot_sdk/blob/pinedio/customer_app/pinedio_lorawan#lorawan-commands-for-the-things-network

From our #TheThingsNetwork Device, copy the AppEUI, DevEUI and AppKey ... We'll enter these into the LoRaWAN Firmware for #PineDio Stack

https://www.thethingsindustries.com/docs/devices/adding-devices/

Why set LoRaWAN Version to "1.0.2 Rev B"? Because #TheThingsNetwork has been upgraded recently ... Setting the incorrect LoRaWAN Version will cause Message Integrity Code errors! (I tried)

https://www.thethingsindustries.com/docs/getting-started/migrating/major-changes/#lorawan-support