Lup Yuen Lee 李立源 @lupyuen@qoto.org

#BL602 Memory Map: C vs #RustLang ... Looks different 🤔

https://github.com/lupyuen/pinecone-rust

Awesome resources for #BL602

https://github.com/mkroman/awesome-bouffalo

3 new tools for Flashing #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/pinecone#other-flashing-tools

Search #BL602 on GitHub to discover cool new projects

https://github.com/search?q=bl602&type=Code

#RustLang Docs for #PineCone #BL602 @PINE64 ... Let's do some weekend disco lights with PWM!

https://lupyuen.github.io/pinecone-rust/

Testing #RustLang on #PineCone #BL602 @PINE64 ... Will Rust overwrite the BL602 Bootloader? 🤔

https://github.com/lupyuen/pinecone-rust

Fixing the JTAG Port on #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/openocd

Test the Remapped JTAG Port on #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/openocd

Remap the JTAG Port on #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/openocd

If you love the LED on #PineCone #BL602 @PINE64 ... Set it free! 😉

https://lupyuen.github.io/articles/openocd

OpenOCD Commands for #PineCone #BL602 @ThePine64

https://lupyuen.github.io/articles/openocd

Connect #OpenOCD to #PineCone #BL602 @PINE64 ... All the steps

https://lupyuen.github.io/articles/openocd

Make your own JTAG Debugger for #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/openocd

JTAG Hunting on #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/openocd

Default JTAG Port on #PineCone #BL602 @PINE64 ... Works OK without remapping too! LED turns multicolour when there's JTAG activity ... JTAG Port also works when PineCone is in Bootloader Mode (Jumper=H)

https://lupyuen.github.io/articles/openocd

Why we use #JTAG on #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/openocd

Remapped JTAG Port that tested OK on #PineCone #BL602 @PINE64 ... GND must be connected or JTAG gets wonky ... All shall be explained here:

https://lupyuen.github.io/articles/openocd

Why we use #OpenOCD with #PineCone #BL602 @PINE64

https://lupyuen.github.io/articles/openocd

JTAG on #PineCone #BL602 @PINE64 ... Works OK with OpenOCD and Sipeed JTAG Debugger! There are 2 interfaces in FTDI FT2232D ... Must select interface 0 not 1! Instructions:

https://github.com/lupyuen/bl602-rust-guide/blob/main/README.md

What's inside the @SipeedIO JTAG Programmer? FTDI FT2232D

https://tang.sipeed.com/en/hardware-overview/rv-debugger/?utm_source=platformio&utm_medium=docs