Lup Yuen Lee 李立源 @lupyuen@qoto.org

How we call our #NuttX #LoRa Library ... To read the SX1262 Registers

https://lupyuen.github.io/articles/sx1262?9#read-sx1262-registers

What are DIO1, BUSY and NRESET Pins on #LoRa SX1262 ... Nope we're not using them on #NuttX OS yet

https://lupyuen.github.io/articles/sx1262?8#connect-sx1262-transceiver

How #LoRa SX1262 is wired up on #PineDio Stack BL604 ... And how we configure the pins on Apache #NuttX OS

https://lupyuen.github.io/articles/sx1262?8#connect-sx1262-transceiver

We port the #LoRa SX1262 Driver to #NuttX OS ... In small steps

https://lupyuen.github.io/articles/sx1262?2#small-steps

Porting the #LoRa SX1262 Driver from Linux to Apache #NuttX OS ... All shall be explained in this article

https://lupyuen.github.io/articles/sx1262?1

Our plain and simple #NuttX #LoRa SX1262 Library is (nearly) done! Porting the library from Linux to NuttX wasn't so hard ... Moving on to LoRaWAN real soon!

https://github.com/lupyuen/lora-sx1262/tree/nuttx

Our #NuttX SX1262 Library correctly receives the #LoRa Message transmitted by #RAKwireless WisBlock! 🎉

https://gist.github.com/lupyuen/0d78b13871fca41ac6d812407890b29b

Here's how we receive #LoRa Messages with our #NuttX SX1262 Library ... Eventually this will be triggered by GPIO Interrupt (instead of polling)

https://github.com/lupyuen/incubator-nuttx-apps/blob/sx1262/examples/sx1262_test/sx1262_test_main.c#L123-L262

Now our #NuttX SX1262 Library shall receive a #LoRa Message ... Transmitted by #RAKwireless WisBlock

https://github.com/lupyuen/wisblock-lora-transmitter

#LoRa Message transmitted by our #NuttX SX1262 Library ... Received OK by RAKwireless WisBlock! 🎉

https://gist.github.com/lupyuen/5fdede131ad0e327478994872f190668

Let's use #RAKwireless WisBlock to inspect the #LoRa Message transmitted by our #NuttX SX1262 Library

https://github.com/lupyuen/wisblock-lora-receiver

SDR shows the #LoRa Chirp transmitted by our #NuttX SX1262 Library 🎉 ... Let's inspect the message with a LoRa Receiver

https://gist.github.com/lupyuen/5fdede131ad0e327478994872f190668

Our #NuttX SX1262 Library transmits a #LoRa Message ... We sniff the message with Airspy R2 SDR

https://github.com/lupyuen/lora-sx1262/tree/nuttx

https://airspy.com/airspy-r2/

Now we transmit a #LoRa Message with our #NuttX SX1262 Library

https://github.com/lupyuen/incubator-nuttx-apps/blob/sx1262/examples/sx1262_test/sx1262_test_main.c#L237-L253

Yesterday we created an empty #NuttX Library for SX1262 ... Today we fill in the #LoRa SX1262 Driver Code

https://qoto.org/@lupyuen/107451151962228189

"Go Long With #LoRa Radio!"

https://makezine.com/2021/05/24/go-long-with-lora-radio/

We take this #LoRa SX1262 Driver for Linux and BL602 IoT SDK ... And tweak it for #NuttX OS

https://github.com/lupyuen/lora-sx1262/tree/nuttx

#LoRa SDR Testing ... With #PineDio Stack BL604 @PINE64

https://lupyuen.github.io/articles/lorawan2

Let's port to Apache #NuttX OS the driver for Semtech SX1262 #LoRa Transceiver

https://github.com/lupyuen/lora-sx1262/tree/nuttx

How SX1262 #LoRa Transceiver is wired up on #PineDio Stack BL604

https://lupyuen.github.io/articles/spi2?29#pin-definitions