I don't know what I've been told..
@stux its just a few kelvins near earth. somethng like -270 C
re: I don't know what I've been told..
@freemo That's bloody damn cold if you ask me brrr
re: I don't know what I've been told..
@stux I do suggest a sweater and scarf yes :)
Interesting fact, despite being super cold it is rather tricky to cool things in space... cause physics :)
re: I don't know what I've been told..
@freemo Not gonna cut it
Ah yes true! The heat cannot go anywhere! You know.. now air and shizzle or other transport vroom vroom
re: I don't know what I've been told..
@stux well you can still get the heat off of things. But you are limited to one of the three heat transfer methods, radiation. Ther eis no convection or conduction.
re: I don't know what I've been told..
You can also evaporate something (but only as long as you have something to evaporate). Surprisingly many spacecraft used evaporative cooling at least sometimes (Gemini had an evaporator that seemed to have been used at low flow continuously, Apollo LM was cooled purely by evaporation, Apollo CSM had an evaporator to allow higher heat rejection rates than by radiators alone and as the sole way to dispose of heat after the SM was gone, Shuttle had an evaporator to cover high heat load intervals and, I assume, to help in the case the payload doors won't open).
re: I don't know what I've been told..
Wikipedia doesn't say anything about water droplet radiators behind able to handle higher temperatures. I also don't understand how would that be possible: the liquid, before being sprayed has to be pumped through pipes, so we need to have a material that can withstand that temperature (and I naively expect that adding the "has reasonably high thermal conductivity" requirement doesn't narrow things that much; does it?).
re: I don't know what I've been told..
re: I don't know what I've been told..
Hm~ I'll need to look up examples of materials used for high-temperature pipes. I had a baseless impression that they're always metal (well, not completely baseless -- they need to be flexible or to have very small thermal expansion coefficient).
What kind of rules you'd want to lawyer? My impression is that the temperature of the coolant is limited by the temperature the device being cooled can handle. Ah, we could try pumping heat from the device into the coolant, thus increasing the cooling power (because coolant's hotter), while paying some penalty in having generated some additional heat (because efficiency of heat pumps is thermodynamically limited)? Thanks, I'll need to think about it.
re: I don't know what I've been told..
like liquid metal
https://en.wikipedia.org/wiki/Liquid_droplet_radiator