James @baldengineer@qoto.org

Going live with Brian from @Elektor's Meet the Maker. Come join us and ask questions about my past projects, Arduino code, or capacitors!

https://streamyard.com/watch/BbdntF72yG7p

That feeling when ...

In a closing session of #Teardown2024, @benhenchke@leds.social walks through the experience of switching to KiCad (for good.)

Welcome to the right side Ben!

HealthyPi Move is an (open source) wearable patient monitor from ProtoCentral. Here, Ashwin Whitchurch explains the sensors at #teardown2024. Available for pre-order: https://www.crowdsupply.com/protocentral/healthypi-move

Ayesha shares her experience in using Pretty Circuit Boards (PCBs) as a STEM outreach tool.

“If you don’t like LEDs, go touch grass.” #teardown2024

Psychogenic explains how to use Tiny Tapeout to configure the magic sand inside of ICs to make your own chips

Day 3 of #Teardown2024 kicks off with Joe Grand talking about and demonstrating fault injection—knowing when to inject the fault is the bulk of the work.

WLCSP: Don’t go blind or get buried by Greg Steiert shows how to breakout a 6x6 with 0.5 and 0.4mm on a single layer! (3 mil spacing) #teardown2024

Impressive @kicad_pcb v8 stats from Wayne (project lead) presented at #Teardown2024

Keep an eye for when this talk’s video comes out. @joeycastillo session on Accounting is a MBA crash course for anyone wanting to things they make. #Teardown2024

#Teardown2024 Day 2 Kicked off with the insanely talented Mohit Bhoite talking about his incredible space themed circuit sculptures!

Sun 6/2, Going live on Retro Repair Round UP, come join us!

Ironically, the battery is fine on this otherwise destroyed IIGS.