#BL602 SPI Chip Select has a problem ... It goes High after EVERY byte ... Which is no-no for SX1262 ... Solution: We control Chip Select via GPIO

https://github.com/lupyuen/incubator-nuttx-apps/blob/spi_test/examples/spi_test2/spi_test2_main.c#L42-L74

Here's our #NuttX App controlling SPI Chip Select via GPIO

https://github.com/lupyuen/incubator-nuttx-apps/blob/spi_test/examples/spi_test2/spi_test2_main.c#L42-L74

Now our #NuttX App is ready to read an SX1262 Register over SPI!

https://github.com/lupyuen/incubator-nuttx-apps/blob/spi_test/examples/spi_test2/spi_test2_main.c#L90-L119

Our #NuttX App reads an SX1262 Register ... But it returns garbage! There's a workaround for this #BL602 SPI Quirk

https://github.com/lupyuen/incubator-nuttx-apps/blob/spi_test/examples/spi_test2/spi_test2_main.c#L90-L119

#BL602 has an SPI Quirk ... We must use SPI Mode 1 instead of Mode 0 ... Let's fix this in #NuttX

https://lupyuen.github.io/articles/spi#spi-phase-looks-sus

For #NuttX on #BL602, we use SPI Mode 1 instead of Mode 0 ... To work around the SPI Mode Quirk

https://github.com/lupyuen/incubator-nuttx/blob/spi_test/drivers/rf/spi_test_driver.c#L51-L57

Our #NuttX App now reads the SX1262 Register correctly! 🎉

https://github.com/lupyuen/incubator-nuttx-apps/blob/spi_test/examples/spi_test2/spi_test2_main.c

Will #NuttX run on #Pine64's PineDio Stack BL604 with onboard Semtech SX1262? Let's find out!

https://lupyuen.github.io/articles/pinedio

Here's how Semtech SX1262 is wired onboard #PineDio Stack #BL604 ... Let's update the Pin Definitions in NuttX

Here are the #NuttX Pin Definitions for PineDio Stack BL604 with onboard SX1262 ... As derived from the schematic

https://github.com/lupyuen/incubator-nuttx/blob/pinedio/boards/risc-v/bl602/bl602evb/include/board.h#L42-L95

Our #NuttX App runs OK on PineDio Stack BL604 with onboard SX1262! 🎉

https://github.com/lupyuen/incubator-nuttx-apps/blob/spi_test/examples/spi_test2/spi_test2_main.c

How we transmit and receive data over SPI on Apache #NuttX OS ... And what's inside the SPI Driver ... All shall be explained here

https://lupyuen.github.io/articles/spi2?1

Calling the SPI Driver in Apache #NuttX OS

https://lupyuen.github.io/articles/spi2?2

To test the #NuttX SPI Functions, we create an App and a Device Driver

https://lupyuen.github.io/articles/spi2?3#spi-test-app-and-driver

#NuttX Apps can't call the SPI Driver directly ... Here's why

https://lupyuen.github.io/articles/spi2?3#spi-test-app-and-driver

Here's how we create a #NuttX App

https://lupyuen.github.io/articles/spi2?4#appendix-create-a-nuttx-app

How we create a Device Driver in #NuttX ... The copy-n-paste way

https://lupyuen.github.io/articles/spi2?5#appendix-create-a-nuttx-device-driver

Enabling the SPI Driver in #NuttX

https://lupyuen.github.io/articles/spi2?6#enable-spi

We enable SPI Logging in #NuttX ... For easier troubleshooting

https://lupyuen.github.io/articles/spi2?7#enable-logging

During #NuttX Startup, we register our Device Driver

https://lupyuen.github.io/articles/spi2?8#register-device-driver

Our Custom Device Driver appears as "/dev/spitest0" in #NuttX

https://lupyuen.github.io/articles/spi2?9#verify-device-driver

Why we chose to clone the "dat-31r5-sp" driver in #NuttX ... Yep we did a Quantitative Analysis of NuttX Drivers!

https://lupyuen.github.io/articles/spi2?10#verify-device-driver

What's inside our SPI Test Driver for #NuttX

https://lupyuen.github.io/articles/spi2?11#inside-the-spi-test-driver

Every #NuttX Device Driver defines a list of File Operations ... Here are the operations for our SPI Test Driver

https://lupyuen.github.io/articles/spi2?12#file-operations

Here's how we transfer data over SPI in #NuttX

https://lupyuen.github.io/articles/spi2?15#write-operation

How we configure the SPI port in #NuttX

https://lupyuen.github.io/articles/spi2?17#configure-spi

Here's how we load our SPI Test Driver in #NuttX

https://lupyuen.github.io/articles/spi2?18#load-the-spi-test-driver

Checking that our SPI Test Driver has been loaded in #NuttX

https://lupyuen.github.io/articles/spi2?19#load-the-spi-test-driver

How our #NuttX App transfers data over SPI

https://lupyuen.github.io/articles/spi2?20#inside-the-spi-test-app

Running our #NuttX App to transmit and receive data over SPI

https://lupyuen.github.io/articles/spi2?21#run-the-spi-test-app

How we test #NuttX SPI with a Logic Analyser

https://lupyuen.github.io/articles/spi2?22#test-with-logic-analyser

Here's why we control SPI Chip Select ourselves on #NuttX

https://lupyuen.github.io/articles/spi2?23#control-chip-select-with-gpio

Controlling SPI Chip Select with GPIO Output on #NuttX

https://lupyuen.github.io/articles/spi2?24#gpio-output-as-chip-select

Testing #NuttX on #BL602 and #ESP32 with Semtech SX1262

https://lupyuen.github.io/articles/spi2?25#test-with-semtech-sx1262

How we connect Semtech SX1262 to #BL602 and #ESP32

https://lupyuen.github.io/articles/spi2?26#connect-sx1262

#BL602 #NuttX tested OK with Semtech SX1262

https://lupyuen.github.io/articles/spi2?27#test-sx1262

Testing Apache #NuttX OS on #PineDio Stack BL604 @PINE64

https://lupyuen.github.io/articles/spi2?28#test-with-pinedio-stack

How SX1262 #LoRa Transceiver is wired up on #PineDio Stack BL604

https://lupyuen.github.io/articles/spi2?29#pin-definitions