Auto Flash & Test on #PineDio Stack #BL604 @PINE64 ... Yep it works! 🎉 ... Up Next: Robot Finger 🤖 👉

https://github.com/lupyuen/remote-bl602#pinedio-stack-bl604

Here's how we Auto Upload the Test Log to GitHub Releases ... Thanks to GitHub CLI 👍

https://github.com/lupyuen/remote-bl602#upload-test-log

Automated Testing of Apache #NuttX RTOS on #PineDio Stack #BL604 @PINE64 ... All shall be explained in this article

https://lupyuen.github.io/articles/auto2?1

Apache #NuttX Testing on #PineDio Stack #BL604 is now Fully Automated ... Except for the Touch Panel which needs a Human Touch 👉

https://lupyuen.github.io/articles/auto2?2

Automated Testing on #PineDio Stack #BL604 covers GPIO, SPI, I2C, LoRaWAN and Touch Panel

https://lupyuen.github.io/articles/auto2?3#testing-checkpoints

Here's how we connect #PineDio Stack #BL604 to an SBC for Automated Testing

https://lupyuen.github.io/articles/auto2?4#connect-pinedio-stack-to-sbc

How we run the Automated Test for Apache #NuttX RTOS on #PineDio Stack #BL604

https://lupyuen.github.io/articles/auto2?5#run-automated-test

Our Automated Test Script flashes and boots Apache #NuttX RTOS on #PineDio Stack #BL604

https://lupyuen.github.io/articles/auto2?6#nuttx-must-boot

Here's how we automagically flash and boot #PineDio Stack #BL604 with an SBC

https://lupyuen.github.io/articles/auto2?7#checkpoint-alpha

Our Automated Test for #PineDio Stack #BL604 detects whether Apache #NuttX RTOS has crashed ... And runs a Crash Analysis

https://lupyuen.github.io/articles/auto2?8#nuttx-must-not-crash

Our Automated Test for #PineDio Stack #BL604 decodes the addresses in the Crash Dump ... By looking up the #RISCV Disassembly

https://lupyuen.github.io/articles/auto2?9#checkpoint-bravo

SPI Bus on #PineDio Stack #BL604 is shared by 3 SPI Devices ... Here's how we do the Automated SPI Test

https://lupyuen.github.io/articles/auto2?10#spi-test

Automated Test for #LoRaWAN on #PineDio Stack #BL604

https://lupyuen.github.io/articles/auto2?11#lorawan-test

#PineDio Stack #BL604 connects to ChirpStack #LoRaWAN Gateway ... And sends a Data Packet from Apache #NuttX RTOS

https://lupyuen.github.io/articles/auto2?12#lorawan-test

Our Automated #LoRaWAN Test on #PineDio Stack #BL604 ... Calls a bunch of #NuttX Libraries and Drivers

https://lupyuen.github.io/articles/auto2?15#checkpoint-delta

(Mostly) Automated Testing of I2C Touch Panel on #PineDio Stack #BL604 with Apache #NuttX RTOS

https://lupyuen.github.io/articles/auto2?16#touch-panel-test

Inside our Touch Panel Test for #PineDio Stack #BL604 on Apache #NuttX RTOS ... And how we might automate the test

https://lupyuen.github.io/articles/auto2?17#checkpoint-echo

#PineDio Stack Automated Test Log gets uploaded to GitHub Release Notes ... By calling the #GitHub CLI

https://lupyuen.github.io/articles/auto2?18#upload-test-log