Is #Ox64 BL808 an SBC or MCU Board? Actually it works like both!
#Ox64 BL808 uses 2 UART Ports ... One for Flashing, another for Linux Console!
Article: https://lupyuen.codeberg.page/articles/ox64.html#flashing-uart-vs-serial-console
#Ox64 BL808 Serial Console only works at 2 Mbps ... Let's test our USB Serial Adapter
Article: https://lupyuen.codeberg.page/articles/ox64.html#test-the-usb-serial-adapter
Booting #Linux on #Ox64 BL808 ... Much easier now, thanks to the OpenBouffalo Team! 👍
Article: https://lupyuen.codeberg.page/articles/ox64.html#boot-linux-on-ox64
Here's how we port Apache #NuttX RTOS to #Ox64 BL808 #RISCV SBC
Article: https://lupyuen.codeberg.page/articles/ox64.html#apache-nuttx-rtos-for-ox64
Inside the #Linux Kernel Image for #Ox64 BL808 SBC
Article: https://lupyuen.codeberg.page/articles/ox64.html#appendix-linux-image-header
Inside the #Linux Device Tree for #Ox64 BL808 SBC
Article: https://lupyuen.codeberg.page/articles/ox64.html#appendix-linux-device-tree
#Ox64 BL808 forwards Peripheral Interrupts ... From M0 Wireless Core (RV32) to D0 Multimedia Core (RV64)
Article: https://lupyuen.codeberg.page/articles/ox64.html#appendix-peripheral-interrupts
@lupyuen thanks for taking the time to write down all this. I just need to find the time to try it out 😬 bookmarked
@pancake Thanks for reading! :-)
Verifying that OpenSBI and U-Boot Bootloader have been flashed correctly to #Ox64 BL808 SBC
Article: https://lupyuen.codeberg.page/articles/ox64.html#verify-opensbi-and-u-boot