Lup Yuen Lee 李立源 @lupyuen@qoto.org

How we Flash #RISCV Firmware to #PineCone #BL602 @PINE64 ... With the #RustLang "blflash" tool by @spacemeowx2

https://lupyuen.github.io/articles/flash

#PineCone #BL602 in Holding Pattern ... Waiting to be flashed ... Jumper IO8 set to H

https://github.com/lupyuen/lupyuen.github.io/blob/master/src/flash.md

Beautiful Boot Screen from #BL602 #RISCV SoC showing its #WiFi capability ... Firmware located here:

https://github.com/bouffalolab/BLOpenFlasher/blob/main/bl602/bl602.bin

Irresistible #PineCone #BL602 @PINE64 ... Hope to see more #RustLang on BL602! 🙂

https://lupyuen.github.io/articles/debug

#PineCone #BL602 can be flashed on #Pinebook Pro with the #RustLang "blflash" tool yay!

https://github.com/spacemeowx2/blflash

#PineCone #BL602 responds to #Pinebook Pro at 2 Mbps ... So far so good!

https://github.com/lupyuen/lupyuen.github.io/blob/master/src/flash.md

Can we flash #PineCone #BL602 ... From Arm64 #Pinebook Pro? Let's find out!

https://github.com/lupyuen/lupyuen.github.io/blob/master/src/flash.md

Top Contributor in Singapore? 🤔 This happens when we use GitHub Pages as a Static CMS for Publishing Articles

https://commits.top/singapore.html

#BL602 EFuse Config ... With dead beef 😂

https://github.com/lupyuen/lupyuen.github.io/blob/master/src/flash.md

#BL602 Partition Table ... Tells us the ROM Layout

https://github.com/lupyuen/lupyuen.github.io/blob/master/src/flash.md

Documenting the steps for Flashing #BL602 Firmware to #PineCone @PINE64

https://github.com/lupyuen/lupyuen.github.io/blob/master/src/flash.md

"Anyone else think the #Pinebook is not tacky enough?"

https://www.reddit.com/r/PINE64official/comments/klqx82/anyone_else_think_the_pinebook_is_not_tacky_enough/?utm_medium=android_app&utm_source=share

How #BL602 Firmware is flashed

https://github.com/bouffalolab/BLOpenFlasher/blob/main/flash_tool.go

While resting my hamstring ... Let's sketch the #BL602 Firmware Flashing Steps!

https://github.com/bouffalolab/BLOpenFlasher/blob/main/flash_tool.go

How #BL602 Firmware Files are transformed before flashing

https://github.com/bouffalolab/BLOpenFlasher/blob/main/flash_tool.go

#BL602 Device Tree that gets bundled into our firmware before flashing over UART 🤔

https://github.com/bouffalolab/BLOpenFlasher/blob/main/bl602/device_tree/bl_factory_params_IoTKitA_40M.dts

Found the #BL602 Firmware to be flashed

https://github.com/bouffalolab/BLOpenFlasher/issues/2

Time to try #BL602 UART Flashing with BLOpenFlasher in #GoLang ... Because flashing from Windows is getting tiring

https://github.com/bouffalolab/BLOpenFlasher

Hunting for a suitable #BL602 GPIO App ... That we shall port to #Mynewt

https://github.com/lupyuen/bl_iot_sdk/blob/master/customer_app/sdk_app_gpio/sdk_app_gpio/demo.c#L60

Who is #CHAS? Why are they making Healthcare so complicated ... When the govt knows everything about me 🤔