🇺🇦🇪🇺 cweickhmann @cweickhmann@qoto.org

I honestly did not see *this* coming from an internet-fed AI. #BestModeOfTransport #dallemini #verkehrswende @SheDrivesMobility @NotJustBikes@mstdn.social

Okay, wir benennen jetzt einfach "Elektrizität" in "E-Fuel" um und die #fdp hält endlich den Rand! #Deal?

#CarryShitOlympics Kleinanzeigen-Edition 😉

Servierwagen und Einlegefächer, Tür und Schubladen für Ikea Kallax durch #Darmstadt gefahren. Mit nem Leihesel von @sigosharing

#Endlich! #Darmstadt

Ab Juni? Aber welches Jahr? 2012? 🤔 😂

Pah, Biblis ist ein weiteres L gewachsen. Und da sage nochmal einer, Atomkraft sei harmlos! 😄

Die Krake Frankfurt/Main.

https://direct.bahn.guru

@Pat @cstanhope @Segebodo @timjan @alinanorakari

So, never trust the silkscreen, I guess...

Why, #MicrochipInc?

So, first of all, thanks for the input, @Pat, @cstanhope, @Segebodo, @timjan, @alinanorakari !

It turns out it was sort of digital but mostly clock related. For some reason, the GCLK Generator 1 was set to 120 MHz (div 1) while in other examples it was set to a lower value of 12 MHz, i.e. higher div (10 for example). Well: now the sawtooth is smooth as a baby's butt.
The thing is: I only found this by going through a dozen graphical representations of the configurations - which were buggy. Not sure why it was GCLK1, by the way. The datasheet says GCLK_DAC must be lower than 12 MHz casually under 47.6.3 Operating conditions ^^ (I set it to 20 MHz (div 6) and it still worked though).

So, at least my hunch was right: This was indeed not a nonmonotonous DAC (because, wow, that would've been awful!).
My second hunch was right too: There's way more experience to gather.

**Lessons learned:**
1. Always make sure your clock settings are okay.
1. Get used to looking for crucial info on speed and timing under sub-paragraph 6.3+ 😵
1. If you can, chose a product with a clean, functional and stable IDE+toolchain (or use your own).

Hey, #Electronics folks!
Has anyone seen such an output for a ramp coming out of a DAC?
This is produced by a simple counter counting from 0 to 4095 and then wrapping.
The sharp dips are absolutely stable and deterministic. They occur at bit switches but I don't seem to get my head around why.
Identical curves on two different DAC peripherals on the same μC and even across different chips/boards (I'm almost certain it's a software problem).

Oh, schön, gerade implodiert unsere #Kita (9 Kündigungen bei vllt. 12-14 Stellen). #Eltern sein in Auto-Bratwurstland ist soooo schön!

Neue Bremssätze am #Fahrrad 😍

Oh no... got to do something else than "programming" now 😱

"Was hast du da? Warum machst du die Banane da rein? Warum drückst du die platt... Warum? Abhaben!!"

Ich wollte ja immer in den Kopf meiner 3jährigen Tochter schauen können. Aber doch beim Frühstück...

Endlich! #CWA #FamilienBekommenAuchCovid

(Bildbeschreibung: Covid-Warn-App hat in Release 2.21.1 endlich eine Möglichkeit für Familien, Testergebnisse der anderen Familienmitglieder in der App zu verwalten)

Huh, giphy test...